Menu
Cart 0

Colour pallet

1.  Glass tinting options

1.1.  Fused glass colour options

All fused glass colours are suitable for any fused glass ring, or pendant design available in our  Artisan Glass Jewellery range.

Transparent glass can be seen through whereas opal glass is opaque.  All items marked with an arrow (<---) is in stock.

1.1.1 Transparent glass

1.1.3  Irid & Textured glass

Iridised glass give a subtle rainbow effect.  They look especially well with metallic images.

1.1.4  Dichroic glass is suitable for dichroic pendants and rings.

If you have a specific colour in mind, please get in touch with us to discuss your options.

1.1.4.1 Single colours

A.  Silver on clear / black

 

B. Crinklized silver

C.  Cyan / copper

D.  Teal / magenta

1.1.4.2 Rainbow colours

Note:  rainbow colours are available in large sheets and as such, when choosing this, pease be mindful that you may not receive an actual complete rainbow in your creation as only part of the glass is used.

A.  Rainbow splinter

B.  Rainbow target

C.  Rainbow stream

D.  Ripple twizzle

E.  Stix

F. Fusion

 

1.1.4.4 Patterned colours

A.  Dots

B.  Gears

1.2  Lampwork glass

We have a wide range of transparent, opaque and colour blended glass in stock.  Silvered glass gives a metallic effect and all some glass combinations cost extra and can be purchased using this link.

Please discuss any colour options you may wish to have.  Due to the volumes, there will not be a colour chart available.

2.  Inlay colours

For coloured glass inlay, we would recommend combining opaque glass listed in 1.1.2 above.  For non breastmilk we can add various shells and pearls as listed in the image below.  There is no cost for these and we request that you specify your colour option at checkout when you place your order.

3.  Resin and breastmilk tinting

Resin tinging is free and breastmilk tinting carries an additional cost.  Single colour resin tinting is included in the price of any purchase.  If no colour option is specified when you place your order with us, your creation will be made with transparent resin.

3.1  NOTE:  

3.1.1  The following colours are no longer available:  bubblegum pink, ocean blue and holographic light pink and light yellow shimmer.

3.1.2   If you would like to add a little sparkle to your unique creation, (whether its breastmilk, hair or any other inclusion) then choose any of the shimmers, flecks, flakes or gold leaf, which we will add to the resin protecting your inclusion.  Gold leaf, silver flakes and copper flakes carry an additional cost and needs to be purchased in addition to your creation.

3.1.3  Flecks arranged in a rainbow design carries an additional cost and must be purchased from the additional inclusion section.

3.1.4  Shimmers, flecks, pearl shimmer, holographic tints and chunky glitter are not suitable for breastmilk tinting.  I.e. to change the colour of your breastmilk.  It is better suited for resin tinting.

3.1.5  If used as a background colour for bezel settings, any of our flecks will not cover all the metal.  Depending on the size of the creation, a lot of the bezel will be visible.  We would recommend adding flecks over a neutral background such as white or one of our pearl shimmer colours.

3.1.6  Holographic tints, stardust, pearl shimmers, iridescent flecks and chunky glitter is heavier than the resin and will naturally set at the bottom of each creation and for non bezel set creations, these tints may feel rougher to the touch if used as encasement.  This is completely normal.

3.1.7   Fluorescent and glow in the dark resin and breastmilk tinting:  00 % non-toxic and non-radioactive. It can be charged over and over again almost indefinitely and will last for more than 10 years.  The tint has a very bright colour in daylight.  The colour intensifies when viewed under ultraviolet (UV) blacklight. Once charged, it glows in the dark for up to 20 minutes with either normal light or UV light. To increase the glow, it is suggested using a  blacklight bulb with a wavelength of 365nm. Colours available include PINK, VIOLET, BLUE,GREEN, YELLOW AND WHITE. Please note that the violet and blue shades do not glow as bright as the other colours

 

3.2.  Metal flake colours

Metal flakes are suitable for resin only and are free.  Multiple colour blending options carry an additional cost.

3.4  Items carrying a cost

All the following items carry an additional cost and can be purchase from the additional inclusions section.

3.4.1  Diamond powder  - Earth mined uncut diamond powder dust from high quality rough diamonds.

3.4.2 Rainbow stardust 

3.4.3 Platinum stardust 

3.4.4 Holographic fibres 5

3.4.5 Jade stardust 

 

3.5  Floral accents 

Are suitable for a wide range of creations, including charm beads, all pendants, bubbles, pearls, all charms and rings. There are 44 different designs to choose and needs to be purchased from the additional inclusions section.  Please specify your choice at checkout by quoting the number.

Note: design 2 is sold out.

 

3.6.  Flakes and leaves

3.6.1  24K Gold Leaf 

Gold leaf is suitable for transparent or semi tinted resin.  We use 24K gold on base gold leaf sheets.  It is not composition gold where high content gold leaf is mixed with other precious metals to resemble a remarkably similar appearance to pure gold.  Each gold leaf inclusion has exceptional gold colour quality and is between 0.2 - 0.4 microns thick. This gold leaf leaf is a special foil that is evaporated with 24K gold.

3.6.2  Silver and copper flakes 

Similar to the gold leaf, silver and copper flakes are derived from aluminium sheets and are used to give a fantastic silver of copper effect to your creation.
 
Photo_11-03-2015_17_59_20

3.6.3 Free flakes

We've added three new inclusions to our flakes range and there is no additional cost associated with it.

12745942_826888154089158_6220997508950691868_n

3.7.  Watch parts

Add genuine watch part cogs and gears to your bezel or resin creation at an additional cost.  It can be purchased by using Additional Inclusions shop listing.

201405052